hartzehn22, you said you are shooting from approximately 8' away, I assume that meant from the BW? If that is correct, you are shooting from the far end of SR1, or the front of SR2. Here is a suggestion. As you know the arm rest and chip rail are approximately 11" wide, if not more, and is offset from. the body of the table, this interferes with the body's natural arm movement. You can build a shooting station made of 3/4" furniture plywood which will provide the same effect as a craps table.Total cost less than $50, or you can buy one assembled for $360 plus shipping, or buy a craps table pick a number and add 3 zeros. You receiving station is made of the same 3/4" furniture plywood, or maybe solid wool. The covering is fine and has a underlayment, but you may want to double the thickness of the floor. That would give you 2.25" of thickness.